| |
|
|
|
|
|
End-Working
Machines |
|
|
|
|
|
|
|
MACHINING
UNIT with
1 NC
AXIS
|
|
This
category of machines uses only the longitudinal movement, so that
the machining is executed on the “Z” axial phase only.
After
a rapid approach to the piece, it is possible to execute the
following operations: spot-facing, chamfering, drilling, internal/external
turning, etc. with regards to the specific tooling.
|
| |
| |
 |
CL32 |
|
| |
|
|
|
|
| |
 |
CL132 |
|
| |
|
|
|
|
| |
 |
CL132-5000 |
|
|
|
| MACHINING
UNIT
with
2
NC axis
|
| This
category of machines uses the longitudinal and transversal movement,
so that the machining is executed on the “Z” and “X” axial
phases.
After
a rapid approach to the piece, it is possible to execute the
following operations: facing by milling, chamfering, neck turning,
centering, drilling, tapping, internal/external turning, etc. with
regards to the specific used tooling.
|
| |
| |
 |
CM102
T12 |
|
| |
|
|
|
|
| |
|
CM152
T12
|
|
| |
|
|
|
|
| |
 |
CM132 |
|
| |
|
|
|
|
| |
 |
CM130
|
|
|
|
|
MACHINING
UNIT
with
3
NC axis |
|
This
category of machines uses the longitudinal, transversal and vertical
movement, so that the machining is executed on the “Z” ,
“X” and “Y”
axial phases.
In
addition to the standard end machining operations indicated on the
previous category, many other operations can be executed thanks to
the interpolation of the 3 NC axis (i.e.: internal/external
threading) or thanks to the presence of the tool changer.
|
| |
| |
|
MC7 |
|
| |
|
|
|
|
| |
 |
MC650 |
|
|
|
| SPECIAL
MACHINES
|
| This
category of machines includes those special models we have executed
in order to reply to specific requirements of our customers or to
those models that cannot be listed under the previous categories
because of their characteristics . |
| |
| |
 |
CL90 |
|
| |
|
|
|
|
| |
 |
CMV60 |
|
| |
|
|
|
|
| |
|
|
|
|
|
